Diamond Systems Tritan Betriebsanleitung Seite 35
- Seite / 90
- Inhaltsverzeichnis
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
autocast universal
®
230 Casting System Accessories and replacement parts Stand 1.9. 03 A 28
When using rematitan
®
ultra investment material:
Use Aluminium oxide Al
2
O
3
(30 µm – 250 µm)
For very fine parts (inlays) careful blasting with polishing
beads is sufficient.
Procedure for finishing titanium
Follow the finishing instructions in the correct sequence.
This enables you to achieve an excellent polish on the
titanium with very little effort and expense.
Preparation of surfaces for ceramic applications:
– use tungsten carbide burs only
– blast carefully with Al
2
O
3
(125 µm – 250 µm) and
2–3 bars of pressure.
Important: After polishing, the workpiece must be allowed
to passivate in the atmosphere for 10 minutes before
cleaning with steam jet or ultrasonic cleaner.
In addition to the component numbers, observe the order
numbers for spare parts on page C 9.
Finishing instructions
Operation Processing material Remarks
Removing the
casting channels
ST cut-off disk (large) (1)
STM cut-off disk (thick) (2)
TX cut-off disk (thin) (3)
Thick casting channels, ST cut-off disk (quick grinder) or STM
(handpiece)
Thin casting channels, TX cut-off disk
Do not tilt, cool workpiece with water
Finishing
(rough)
Tungsten carbide bur, mini (4)
Tungsten carbide bur, midi (5)
Tungsten carbide bur, maxi (6)
Tungsten carbide bur, maxi plus (7)
Maximum rotation speed 10.000 /min.
Low pressure force
Finishing
(fine)
Aloxin stone, B, blue (8)
Aloxin stone, C, blue (9)
Circular motion on workpiece
Do not use Aloxin stone material with surfaces for ceramic
application
Fine grinding
Emery paper -500- (10) Recommended before rubber buffing
Rubber polishing
Rubber disk (grey) (11)
Rubber disk (red) (12)
Rounded rubber polisher (red) (13)
Rubber cylinders (red) (14)
Use sparingly without pressure and at low speeds
(do not overheat)
grey = preliminary polish, red = fine polish
(align cylinders before first use)
Polishing
Polishing brush, large, (polishing motor) (15)
Polishing brushes, black (16)
Small brushes (17)
Tiger brilliant, polishing paste (18)
Change direction of polish frequently
For high lustre, no addition of polishing paste
- Casting System 1
- The autocast universal 3
- 230 Casting 3
- System from 3
- Muffle System 9
- Wax: Reducing Tension 9
- Preheating Crowns/Bridges 11
- Processing Time 14
- Setting Time / Trimming 14
- Grinding 14
- Waiting Time 14
- Preheating Cycle 15
- Availability 15
- Quantity of Casting Metal 15
- Microwave Drying: 17
- Processing: 17
- Weekend Operation: 19
- Microwave Drying 19
- Reduced Speed Operation with 19
- Availability: 20
- Preparation 21
- Duplication with rematitan 21
- Setting time 22
- Drying the model 22
- Recommended waxing 22
- M-(Ti4)-casting metal 24
- Sprue/sprue former 25
- Positioning of funnel former 25
- Preparation for investing 26
- Fixation on the base plate 26
- Investing 27
- Preheating 27
- Preheating oven 27
- Preheating the muffle 28
- Amount of rematitan 28
- II Telescopic crowns 31
- Polishing 33
- Note on safety 34
- Description 34
- General Notes 34
- Preliminary operation 34
- 4. Casting with Alloys 36
- Ceramic seal 37
- Melting electrode 37
- Melting process: 38
- Controlling the output 38
- J.P. Winkelstroeter KG 39
- Casting Unit 40
- Index autocast universal 41
- 230 Casting Unit 41
- Instructions 43
- Safety Regulations 44
- Note on Instructions 45
- References to residual risks 45
- Fundamental Safety 46
- Safety devices 47
- Safety measures 47
- Training of staff 47
- Electrical hazards 48
- Danger Points 49
- Modifications to the machine 50
- Note on Maintenance 51
- Information for the 54
- Technical data 55
- Installation 56
- Instructions for the 57
- Ceramic seal (R) 59
- Never open the chamber door 62
- Manipulating of the process 63
- Do not open chamber door 63
- End of process 63
- Danger of burns! 63
- Casting of alloys: 64
- Maintenance 67
- Replacing the safety glass 68
- Weekly maintenance 68
- Error signals – 69
- Accessories for 71
- Spare parts list 72
- Machine diagrams 73
- Pressure gauge 74
- Individual elements of the 74
- Melting and 75
- EEC-Declaration of Conformity 76
- Gießsystem 77
- C Accessories and spare parts 78
- Guarantee C13 78
- X-Control 86
- System components 87
Verwandte Produkte und Handbücher für Elektrische Gehäuse Diamond Systems Tritan
(44 Seiten)© 2020, manymanuals.de. Alle Rechte vorbehalten. | 0.052 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern