Diamond Systems Tritan Betriebsanleitung PDF herunterladen (Seite 66)

autocast universal

230 Casting System Operation of the autocast universal Stand 1.9. 03 B 26

At a power output higher than

50%, the second safety glass has

to stay, otherwise there is a chance

of eye damage due to the bright

stream of light.

If after 90 seconds the CAST button

is not pressed, the crucible will tilt

automatically.

• The remaining sequence is the same as casting with

titanium (Page B 22).

Interruption of process:

The melting- and casting-process may be interrupted at any

time by pressing the “STOP”-button without tilting the

crucible.

All electrical proceedings are cut off and the chambers are

flooded with air.

After elapse of a safety block of 40 seconds an acustic signal

indicates the termination of the process.

Do not open the chamber door

before termination of the process!

Crucible holder with ceramic

crucible cannot be quenched in

water. The sudden cool down

could break the crucible.

Parameters for processing alloys:

– Flushing time 4s

– Vacuum time max. 15s

– Cooling time 10 s

Additional function Crucible control

The tilt function of the crucible may be even controlled with

open door of the casting chamber, by pressing the “CAST”

button. With this function, also a mislocated crucible may be

released and removed.

1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 89 90

Keine Kommentare

Diamond Systems Tritan Betriebsanleitung Seite 66